My Guides
Guides I've Contributed To
Completed Guides
Questions
-
What RPM's correspond to which numbers on my router?What RPM's correspond to which numbers on my router?
-
Is the PanelDue compatible with the WorkBee Firmware?Is the PanelDue compatible with the WorkBee Firmware?
-
How do I switch my Duet from Wifi to Access Point Mode Wifi?How do I switch my Duet from Wifi to Access Point Mode Wifi?
-
My WorkBee does not home? It just moves away from the switchMy WorkBee does not home? It just moves away from the switch
-
The WorkBee has significant vibrating on the lead screws?The WorkBee has significant vibrating on the lead screws?
-
The IP Address on my WorkBee keeps changing?The IP Address on my WorkBee keeps changing?
-
Can I add external buttons to the WorkBee CNC Machine?Can I add external buttons to the WorkBee CNC Machine?
-
How do I switch a motor to the spare stepper driver output?How do I switch a motor to the spare stepper driver output?
-
How do Tool (Endmill) changes happen on the WorkBee?How do Tool (Endmill) changes happen on the WorkBee?
-
My Ethernet WorkBee is not connecting when plugged directly into a comMy Ethernet WorkBee is not connecting when plugged directly into a computer?
Answers
-
Answer to "Still trying to surface my Spoiler Board .. HELP ;-)"Hi, Can you email us the file please? As well as send us this: - Go to Files > System. Open config-override.g and copy/paste the contents back to us Once we have these two pieces of information we can work out exactly what the issue is Thanks!
-
Answer to "Spoiler board surfacing lines"If there are cut lines on the bottom surface of a piece of material, the router head needs tramming. Tramming the Router Head is completed after surfacing the spoilerboard and will make sure the end mill is parallel to the spoilerboard. To tram a Router Mount, we recommend creating a tool similar to this video: https://www.youtube.com/watch?v=9h5srzEB... To tram the Y-Axis, this can be completed in a similar fashion to the video above. However, loosen the bolts on both sides indicated by the green arrow in Step 1 of this guide: 4. X-Gantry Assembly To tram the X-Axis, attach the Height Reference tool, as per Step 3 in this guide: 7. Router Mount And complete Step 4 to attach the Router Mount perfectly on top of the height reference tool.
-
Answer to "Order ID: 330828 ILIES MARIAN PETRU"Hi, Where have you got up to with this guide: 2. Connecting your Controller to a Network - Wifi You can contact us at help@ooznest.co.uk
-
Answer to "plasma cutter connection and config"Hi Mike, We wouldn't advise using the WorkBee with a Plasma cutter, due to the wheels and other parts being plastic, that splatter will damage them. In addition, Plasmas normally require torch height control, this is not something our controller supports. A plasma cutter uses arc voltage to maintain a consistent distance from the plate while cutting. The controller we use has no way of reading this arc voltage, therefore it cannot automatically control the height.
-
Answer to "workbee behaving as though surface is uneven"Hi Robert, Thanks for your question. Have you surfaced your spoilerboard?
-
Answer to "Unstable connection with Duet via Ethernet"Hi Irfan, I believe your board is being returned for testing. Please let me know if you need anything else. Ryan
-
Answer to "g0/g1 insufficient axes homed"Hi, If we can get a screenshot of the weblink reprapfirmware.org message that would be great. Best Regards Ryan Lock
-
Answer to "Vcarve - Kyocera - Tool Library"Hi Zac, Thanks for your question. I am afraid at the moment there isn’t a library for the Kyocera endmills. Best Regards Ryan Lock
-
Answer to "Weird z-axis issue when repeating a job"Hi Kalamon, Thanks for your question. It is surprising that it would cut deeper on a single pocket, but all the others are fine. Have you surfaced your spoilerboard to insure it is parallel to the X-Gantry of the machine? Best Regards Ryan Lock
-
Answer to "How do I get into the control panel to operate the machine?"Hi Keith, I believe you got this issue sorted? Best Regards Ryan Lock
Reputation over time
Reputation Breakdown
| Event | Count | Delta |
|---|---|---|
| Someone completed your guide | 2860 | 44824 |
| Admin approved your wiki | 39 | 1650 |
| Admin approved your guide | 12 | 1140 |
| Post was voted up | 32 | 384 |
| Answer accepted | 11 | 330 |
| Post upvoted containing a link to your guide | 9 | 75 |
| Someone liked your guide | 9 | 53 |
| Categorization accepted | 91 | 35 |
2